Werkzeug zum Entfernen des Badewannenablaufschlauchs (1 Stück) – Robuster, doppelseitiger Aluminium-Hantelschlüssel – 15 cm

This double-ended bathtub drain wrench is suitable for most bathtub drains with an inner diameter of 1-3/8 inches or 1-1/2 inches. This tool is ideal for removing most old drains in bathtubs and showers, as well as installing new ones. When removing a bathtub drain, check that the drain base size is compatible with this tool. If the crossbar in the drain is severely damaged, you may need to use a special tool called a drain remover. To operate this drain tool, use an adjustable wrench or a sturdy screwdriver; simply slip the tool over the crossbar of the drain to quickly loosen the drain assembly. This tool is made of robust, lightweight, and very strong cast aluminum. It helps reduce hand fatigue, allowing plumbers to efficiently remove or install bathtub drains. How to use: Select the wrench end that matches the opening of the bathtub drain and insert it into the drain. Clamp the tool using an adjustable wrench, or pass a sturdy screwdriver through the tool. Turn the tool counterclockwise to loosen the drain and clockwise to tighten it. How to use: 1. Select the correct side of the tool (for the bathtub drain opening). 2. Insert the tool into the drain outlet. 3. Pass a screwdriver through the tool, or use an adjustable wrench to clamp the tool. 4. Turn counterclockwise to loosen the drain hose; turn clockwise to tighten the drain hose. Note: This tool is suitable for most 1-3/8 inch and 1-1/2 inch bathtub drain hoses. However, it may not work correctly for the following types of drain hoses: 1. Drain hoses with an oversized metal disc in the center; 2. Drain hoses with severely corroded crossbars; 3. Drain hoses with only three internal crossbars (pins) instead of four. Please read the product specifications and instructions carefully before purchasing.