4-6 Bar Druckluftnagler, Pneumatische Druckluftnagler 4-16mm Luftkraft Hefter Naglerhefter Tacker für Werkstatt und Haus

Description

A powerful tool is essential for wood-nailing jobs. To help you do a better job of placing nails, take a look at our pneumatic nailer! It efficiently combines dynamics and mechanics, and its outstanding performance enables you to finish your work faster and easier. The simple operation also saves you time. With it, you will experience a more efficient and accurate nailing experience.

Key Features

Built to Last: It is made of high-quality aluminum and iron and adopts high-temperature quenching treatment, with high strength and good hardness, resistant to rust and impact, which can bring you long and excellent service.

Excellent Performance: Reasonable structure, large-capacity nail magazine, high-strength nozzle, 4-8bar normal air pressure, and powerful sealed cylinder enable this product to achieve continuous and fast nail placement without jamming, which effectively improves your working efficiency and reduces the unsightly appearance and surface damage caused by manual nailing.

Simple Operation: The simple construction, sensitive work & magazine switches, one-piece firing pin design, and rubberized non-slip handle allow you to set up and start using it immediately.

Rear Exhaust Design: It prevents air from blowing directly at you or people around you, reducing the risk of accidental injuries, while also creating less noise.

Easy to Carry and Store: The small size of 5.91*1.77*7.87 inches, 2.09 lbs weight, and carrying case allows you to store and bring it to any workplace easily.

Economical: Compared to electric or battery-driven nailers, pneumatic nailers can save costs to a certain extent.

Easy Maintenance: Smooth surfaces and simple construction eliminate the need for frequent maintenance, greatly reducing maintenance costs.

Ideal Gift: This product offers excellent performance and can be given as a gift to family, friends, and loved ones to make their work easier.

Details 

Upper Iron Cover: It ensures a more stable performance and can also be used as a hammer.

Quality Nail Cartridge: It is nitriding heat-treated for greater strength, wear resistance, and longer service life.

Application

This product is suitable for nails with a length of 0.16-0.63in and a width of 0.5in, designed for wood, concrete, and steel applications, such as plywood nails, furring strips, steel wire lathe mounting, steel strapping, fencing, decking, subflooring, etc., which can be widely used in DIY projects, furniture factories, decorative industries, construction sites, truss construction, building framing, woodworking, and more.

How to Use

1. Connect the air compressor(not included) according to the correct connector size(air pressure 4 bar or more).

2. Press the work switch a few times without nailing.

3. Pull open the lower movable magazine and load nails (a whole row or half dozen).

4. Close the magazine and the nail-driving operation can be started.

Specification

Model: 8016

Color: Blue, Black, Red

Material: Aluminum, Iron, Rubber

Process: High-temperature Quenching, Nitriding Heat Treatment

Power Source: Pneumatic

Exhaust Mode: Rear Exhaust

Capacity: 125 PCS

Noise: 60dB(A)

Safe Air Pressure: 4-6bar/58-87PSI

Normal Air Pressure: 4-8bar/58-116PSI

Working Air Pressure: 4.8bar/70PSI

Applicable Nail Shoulder Width: 12.8mm/0.5in

Applicable Nail Length: 4-16mm/0.16-0.63in

Inlet Size: 6mm/ 1/4in

Air Consumption: 0.5CFM

Air Tube Inner Diameter: 6mm/ 1/4in

Product Size: 15*4.5*20cm/5.91*1.77*7.87in

Package Size: 23.75*19.5*5.2cm/9.35*7.67*2.05inch

Gross Weight: 1.2kg/2.64 lbs

Net Weight: 0.95kg/2.09 lbs

Package Included

1* Pneumatic Nailer

1* English Manual

1* Carrying Case

Notes 

1. Please check the size before purchasing.

2. Please read the instruction manual completely before installation and use, and pay particular attention to the safety instructions included.

3. Please use only clean and dry air. Please do not use flammable and explosive substances such as oxygen or high-pressure compressed air.

4. Please do not point this product at anyone, disconnect the air supply and remove the magazine before servicing.

5. For old or high-strength concrete floors, we recommend the use of concrete nails and steel nails, which are better suited and more powerful in penetrating the floor.

6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.