Luftreiniger – UVC-Lampensterilisation – Formaldehydentfernung – Mini-Luftreiniger mit negativen Ionen für den Hausgebrauch

Product parameters:

Airflow: 210 m³/h;

Maximum air speed: 1500 - 2400 rpm;

Noise level: 32 dB/39 dB/50 dB;

Fan parameters: 12038 brushless DC motor;

Cleaning area: 0-30 m²;

Rated input power: DC12V-0.5A;

Rated power: 3W in night mode, 6W at full speed;

Power supply type: Type-C (including one data cable);

Filter: H13+ composite filter (1440 hours/recommended replacement every two months);

Instructions for use: 1. Turn the device over before first use, open 1. Open the filter housing in the unlocking direction, remove the filter and the power adapter, remove the PE bag covering the filter, align the filter clips with the device for installation, and close the filter housing in the locking direction. Then place the device upright; 2. Insert the DC plug into a DC outlet and insert the AC/DC adapter into the corresponding outlet; 3. After pressing the "On/Off" button, the indicator light will illuminate and an audible signal will sound to indicate that the air purifier is switched on. Pressing the "On/Off" button again will cause the indicator light to flash in a pulsating pattern. An audible signal will also sound to switch off the air purifier;

On/Off: Touch the button to switch on the air purifier. By default, the device operates in the medium setting;

Adjust fan speed: This device offers three settings: low, medium, and high. Tap the fan speed button repeatedly to select the desired setting;

Night mode: Tap the button to turn it on or off. When night mode is activated, the other button lights turn off automatically and the brightness of the power button is reduced by 30%;

Filter: ① If the filter is not inserted correctly during use, the filter indicator light flashes green. As soon as the filter is inserted correctly, the indicator light turns off automatically; ② After 1440 hours of continuous use, the filter indicator light flashes red automatically, indicating that the filter needs to be replaced. After replacing the filter, press and hold the filter button for 5 seconds to activate reset mode and stop the red indicator light from flashing;

Timer setting: The timer can be set to 2, 4, or 8 hours. Tap the timer button repeatedly to select the desired number of hours. To cancel the timer function, tap the timer button repeatedly until the indicator light goes out;

Dimensions: 145*145*240 mm;