Manuelles Hydraulisches Rohrbiegemaschine Rohrbiegegerät Max.90°& Biegekraft:10T

Spezifikation

Modell: SWG-1

Farbe: Gelb, Schwarz

Material: Duktiles Gusseisen

Montage erforderlich: Ja

Montage-Typ: Freistehend

Max. Biegewinkel: 90°

Max. Biegekraft: 10T

Form-Spezifikationen: 1/4", 5/16", 3/8", 1/2", 3/4", 1"

Hub: 160mm/6.3in

Biegebereich: 1/4-1" (Außendurchmesser: 13-34mm)

Minimale Rohrwanddicke: 2.5mm/0.1in

Produktgröße: 45*46*63cm/17.72*18.11*24.8in

Verpackungsgröße: 52.5*28.7*17cm/20.67*11.30*6.69in

Bruttogewicht: 23.44kg/51.68lbs

Nettogewicht: 20kg/44.09lbs

Paket eingeschlossen

1* Manuelle hydraulische Rohrbiegemaschine

1* Englisches Handbuch

6* Gussformen

1 Paar* Handschuhe

Alles Zubehör für den Gebrauch

Anmerkungen

1. Bitte überprüfen Sie den Stil und die Größe vor dem Kauf.

2. Bitte lesen Sie die Gebrauchsanweisung vor der Installation und Verwendung vollständig durch und beachten Sie insbesondere die Sicherheitshinweise.

3. Es ist nicht geeignet zum Biegen von dünnwandigen Rohren, OD-Stahlrohren, Nichteisenrohren, nicht-metallischen Rohren und Vierkantrohren.

4. Bitte stellen Sie sicher, dass Sie die Entlüftungsschraube bei der Verwendung lösen, andernfalls kann es zu Leckagen der Öldichtung kommen.

5. Die Wandstärke des Rohres sollte nicht weniger als 2,5 mm betragen, sonst schrumpft das Rohr.

6. Bitte erlauben Sie den leichten Farbunterschied durch die Aufnahme Licht und 1-3cm Fehler aufgrund manueller Messung und stellen Sie sicher, dass Sie nichts dagegen haben, bevor Sie bestellen.

Description

Do you want to bend tubes easier and faster? Then try this high-performance manual hydraulic pipe bender. It has different sizes of bender molds, so you can easily bend tubes of different sizes. This practical and efficient tool will provide you with a fast and affordable way to bend tubes while saving you labor.

Key Features

Robust and Durable: It is made of high-quality ductile cast iron, very strong, impact-resistant, anti-rust, and wear-resistant, to ensure a long service life.

Powerful Bending Ability: With a maximum bending force of 10T, 6 molds in different sizes, and a reasonable structure, it can accurately and smoothly bend pipes with a diameter of 1in and wall thickness larger than 2.5mm to 90°, which is the ideal manual pipe bending tool in construction, chemical, plumbing, and other sectors.

User-friendly Design: It is designed with adjusting columns to adjust the bending amplitude of the bent object, which can meet your actual requirements. The thickened bend joint has smooth polished edges, makes connecting more naturally and firmly with the bend opening.

Labor-saving Operation: The ergonomic handle and hydraulic design reduce fatigue and effort and greatly improve efficiency.

Complete Kit: The kit includes a pipe bender, 6 molds, adjusting columns, pipe bending butt joint, mounting bracket, etc., which can be directly applied to a variety of construction scenarios, without having to carry a series of heavy and bulky traditional pipe bending tools.

Bright Appearance: The bright yellow appearance gives a refreshing feeling and injects vitality into your work.

Easy to Install: Thanks to its simple structure, complete accessories, and clear and detailed instructions, you can assemble it quickly.

Easy to Clean: The smooth surface and simple structure let you easily wipe the dust and residue with a wet towel.

Details

Protective Gloves: They can reduce scratches, cuts, and other injuries caused by friction or accidental collisions during work.

Air Release Valve: Opening the air release valve at the right time can avoid excessive pressure damage to the equipment and ensure the safety of the operator.

Seal Rings: They can effectively prevent oil leakage.

Application

It can be used for bending pipes with a diameter of 1in and a minimum wall thickness of 2.5mm, such as galvanized pipe welding, seamless steel pipe, water pipe, iron pipe, wire pipe, gas pipe, steel pipe, and aluminum pipe. It is suitable for air conditioning and cooling systems, underfloor heating, petroleum, automotive, hydraulic and pneumatic systems, lawn sprinkler systems, and more.

Specification

Model: SWG-1

Color: Yellow, Black

Material: Ductile Cast Iron

Assembly Required: Yes

Mounting Type: Free-standing

Max. Bending Angle: 90°

Max. Bending Force: 10T

Mold Specifications: 1/4", 5/16", 3/8", 1/2", 3/4", 1"

Stroke: 160mm/6.3in

Bending Range: 1/4-1"(Outer Diameter: 13-34mm)

Minimum Pipe Wall Thickness: 2.5mm/0.1in

Product Size: 45*46*63cm/17.72*18.11*24.8in

Package Size: 52.5*28.7*17cm/20.67*11.30*6.69in

Gross Weight: 23.44kg/51.68lbs

Net Weight: 20kg/44.09lbs

Package Included

1* Manual Hydraulic Pipe Bender

1* English Manual

6* Molds

1 Pair* Gloves

All Accessories for Use

Notes

• Please check the style and size before purchasing.
• Please read the instruction manual completely before installation and use, and pay particular attention to the safety instructions included.
• It is not suitable for bending thin-walled pipe, OD steel pipe, non-ferrous pipe, non-metallic pipe, and square pipe.
• Please be sure to loosen the exhaust screw when using, otherwise, it may cause oil seal leakage.
• The pipe wall thickness should not be less than 2.5mm, or the pipe will shrink.
• Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.