Schlauchreinigungsset für Hochdruckreiniger – 15 m – mit Düse und Schwenkdüse – Professionelles 180-Bar-Abfluss-Spiralset – mit Adapter für Kärcher K2/K3/K4/K5/K6/K7 Zubehör – AA

General Description

The pipe cleaning kit for high-pressure cleaners is designed for effective pipe cleaning. This 15-meter set includes a drain cleaning hose, a Kärcher adapter, a nozzle, and a swivel nozzle, allowing you to easily clear blockages in pipes.

Technical Data

Maximum operating pressure: 180 bar

Maximum operating temperature: 60 °C

Connection: M22 IT (female thread)

Connection: 1/8" AG (male thread)

Hose inner diameter: 14 mm

Compatibility and Accessories

Compatible with Kärcher pressure washers K2/K3/K4/K5/K6/K7

Also compatible with other brands such as Kränzle, Robyi, Honda, etc.

Scope of delivery: 1 x 15 m drain cleaning hose, 1 Kärcher M22 adapter, 1 nozzle, 1 swivel nozzle, 1 PTFE tape

Installation

Simply lay the high-pressure hose flat, extend it before use, and then connect the fitting to the appropriate pressure washer gun. Note that this hose must only be connected to a pressure washer and not directly to a tap.

Application

Use the nozzle with the 3 rear nozzles at a 33° angle to remove debris from drain and sewer pipes. The swivel nozzle with 1 front nozzle at a 0° angle and 3 rear nozzles at a 33° angle allows you to effectively clear blockages.

Further Information

The inner hose is made of thermoplastic polyester.

The reinforcement layer is made of high-strength polyester fabric.

The outer layer is made of thermoplastic polyurethane and offers resistance to weathering, oil, abrasion, and ozone.

Note: Due to manual measurement The size may vary slightly. 2 cm / 1 inch error. Colors and sizes may vary slightly depending on the monitor and viewing angle.